New

Electric-cylinder
EDP series Electric Gripper/ Open-loop

Bore size: Ø12~Ø16.

  • 1. Worm wheel and gear moving type, self-lock function.

    Power off. Maintain clamping force after restart.
  • 2. High precision

    Proximity sensor fixed point in place without back and forth correction.
  • 3. Stop stability

    Used in light loading, stable stop when moving.
  • 4. No air source

    Suitable for the place without air source, replace gripper.
Model EDP-12 EDP-16
Pushing force (N) 3 6
Open/Close angle (mm) 4
Max. speed (mm/s) 10 40
Drive mode by worm screw, gear and gear rack
Ambient operating temperature 5~40°C
Ambient operating humidity (%) 35~85
Motor Size (∅) 12 16
Positioning repeatability (°) ±0.05
Weight (kg) 0.15 0.18
Acting Double acting
New

Electric-cylinder
EDG series 2-Finger Electric Gripper

Worm screw and gear movement.
Feedback signal fuction.
High precision.

  • PDF
  • 1. Worm screw and worm wheel self-locking function

    Power off and reboot then maintain the same gripping force afterward
  • 2. High precision

    Repeatability ±0.02°
  • 3. Aluminum alloy outer shell and high efficiency for dissipation

  • 4. Collocate with closed loop motor (Signal feedback)

Working environment General
Model EDG-20 EDG-25 EDG-35 EDG-42
Gripping force (N) 14 80 140 220
Open/Close stroke (mm) 8 14 22 30
Max. speed (mm/s) 62.8 78.5 125 157
Drive mode by worm screw, gear and gear rack
Ambient operating temperature (°C) 5~40
Ambient operating humidity (%) 35~85
Motor Size (□) 20 25 35 42
Positioning repeatability (mm) ±0.02
Backlash (one side) (mm) 0.2 0.3 0.4
Lost motion (one side) (mm) 0.05 0.15
Weight (kg) 0.3 0.5 1.0 1.4
New

Electric-cylinder
EDF series 2-Finger Electric Gripper/ Long Stroke

Timing belt movement.
Feedback signal fuction.
High precision.

  • PDF
  • 1. Worm screw and worm wheel self-locking function

    Power off and reboot then maintain the same gripping force afterward.
  • High precision

    precision repeatability (±0.05mm).
  • 3. Aluminum alloy outer shell and high efficiency for dissipation.

  • 4. Collocate with closed loop motor (Signal feedback)

Working environment General
Model EDF-20 EDF-32
Gripping force (N) 46 142
Open/Close stroke (mm) Horizontal 24 32
Vertical 48 64
Lead (mm) 1 1.25
Open/Close speed (mm/s) 0~50
Drive mode by ball screw and belt
Ambient operating temperature (°C) 5~40
Ambient operating humidity (%) 35~85
Motor size (□) 25 42
Precision repeatability (mm) ±0.05
Backlash (one side) (mm) lower than 0.5
Lost motion (mm) lower than 0.3
Weight (kg) basic type 0.6 ;long stroke 0.8 basic type 1.6 ;long stroke 2.0
New

Electric-cylinder
EDM series Angular Type Electric Gripper

Worm screw and gear movement.
Feedback signal fuction
High precision

  • PDF
  • 1. Worm screw and worm wheel self-locking function

    Power off and reboot then maintain the same gripping force afterward.
  • 2. High precision

    Repeatability ±0.05°
  • 3. Aluminum alloy outer shell and high efficiency for dissipation.

  • 4. Collocate with closed loop motor (Signal feedback)

Working environment General
Model EDM-20 EDM-25 EDM-35 EDM-42
Gripping force (N) 6.4 25 60 90
Open/Close angle (°) 180
Max. speed (°/s) 600
Drive mode by worm screw and gear
Ambient operating temperature (°C) 5~40
Ambient operating humidity (%) 35~85
Motor Size (□) 20 25 35 42
Positioning repeatability (°) ±0.05
Backlash (one side) (°) 1 2.5
Lost motion (one side) (°) 0.1 0.3
Weight (kg) 0.3 0.5 1.0 1.3
New

Electric-cylinder
EDQ series 3-Finger Round Body Electric Gripper

Bore size: Ø25~Ø42.

  • 1. Worm wheel and gear moving type, self-lock function

    Power off. Maintain clamping force after restart.
  • 2. Close-Loop motor (Feedback signal)

  • 3. High precision

    Repeatability ±0.02mm.
Model EDQ-25 EDQ-42
Gripping force (N) 22 102
Open/Close angle 10 14
Max. speed ( mm/s) 40 50
Drive mode by worm screw, gear and gear rack
Ambient operating temperature (°C) 5~40
Ambient operating humidity (%) 35~85
Motor Size (□) 25 42
Positioning repeatability (°) ±0.02
Backlash (one side) (mm) 0.3 0.4
Lost motion (one side) (mm) 0.15
Weight (kg) 0.15 0.18
Acting Double acting
New

Electric-cylinder
EDK series Electric Slide Table/ Open-loop

Bore size: Ø25~Ø36; Stroke: 25~100mm.

  • 1. High precision

    Proximity sensor fixed point in place without back and forth correction.
  • 2. Stop stability

    Used in light loading, stable stop when moving.
Model EDK-25 EDK-36
Gripping force (N) 20 60
Open/Close angle 25, 50, 75, 100
Max. speed (mm/s) 100
Drive mode Worm screw
Ambient operating temperature (°C) 5~40
Ambient operating humidity (%) 35~85
Motor Size (PM) 25 36
Positioning repeatability (°) ±0.05
Acting Double acting
New

Electric-cylinder
EDX series Electric Slide Table

Belt and screw moving type.
Close-loop motor.
High precision.

  • PDF
  • Max. push force

    466N。
  • High precision

    precision repeatability (±0.02mm)
  • Aluminum alloy outer shell, high efficiency for dissipation

  • Collocate with close circuit motor (Signal feedback)

Working environment General
Model EDX-16
Stroke (mm) 30, 50, 75, 100
Lead (mm) 1 2
Max. push force (N) 466 233
Weight Load (kg) Vertical 6 6
Horizontal 2 1
Speed (mm/s) 0~50 0~100
Drive mode by worm screw, worm wheel and Belt
Ambient operating temperature (°C) 5~40
Ambient operating humidity (%) 35~85
Motor Size (□) 25
Lost motion (mm) lower than 0.3
Weight (kg) 30mm:1, 50mm:1.1, 75mm:1.2, 100mm:1.3
New

Electric-cylinder
EQX series Electric Actuator

Roller screw movement.
Close-loop motor.
High precision.

  • PDF
  • 1.Max. thrust

    466N。
  • 2.High precision

    precision repeatability (±0.02mm).
  • 3. Aluminum alloy outer shell and high efficiency for dissipation.

  • 4. Collocate with closed loop motor (Signal feedback)

Working environment General
Model EQX-10
Lead (mm) 1 2
Thrust (N) 466 230
Work load (kg) Horizontal 6 5.2
Vertical 2 1.7
Stroke (mm) 25, 50, 75, 100
Speed (mm/s) 50 100
Drive mode by ball screw
Ambient operating temperature (°C) 5~40
Ambient operating humidity (%) 35~85
Motor size (□) 25
Position repeatability (mm) ±0.02
Backlash (mm) lower than 0.2
Lost motion (mm) lower than 0.2
Weight (kg) 25mm:0.64;50mm:0.74;75mm:0.84;100mm:0.94
New

Electric-cylinder
ETB series Electric Rotary Table

Belt and screw moving type.
Close-loop motor.
High precision/ High rotation torgue.

  • PDF
  • 1. Worm screw and worm wheel self-locking function

    Power off and reboot then maintain the same gripping force afterward.
  • 2. High precision

    Precision repeatability (±0.02mm)
  • 3. Aluminum alloy outer shell and high efficiency for dissipation.

  • 4. Collocate with closed loop motor (Signal feedback)

Working environment General
Model ETB-10 ETB-30 ETB-50
Open/Close torque (N-m) 0.2 0.8 7
Work load (kg) 10N 50N 150N
Open/Close angle (°) 330
Max. speed (°/s) 420
Drive mode by worm screw, worm wheel and belt
Ambient operating temperature (°C) 5~40
Ambient operating humidity (%) 35~85
Motor size (□) 20 25 42
Precision repeatability (°) 0.05
Backlash (°) ±0.3
Weight (kg) 0.5 0.8 1.5

Others

solenoid valves control valves flow meter precision regulator actuator rotary cylinder rodless cylinder air cylinder air gripper compact cylinder electric actuator vacuum pads vacuum generator electric gripper FRL guide cylinder clamp cylinder rodless air cylinder dual pneumatic cylinder

Other links

https://www.chelic.com/website/en/products-SOin-1.html https://www.chelic.com/website/en/products-SOin-4.html https://www.chelic.com/website/en/products-DIin-1.html https://www.chelic.com/website/en/products-MOin-12.html https://www.chelic.com/website/en/products-CYin09-1.html https://www.chelic.com/website/en/products-CYin14-1.html https://www.chelic.com/website/en/products-CYin11-2.html https://www.chelic.com/website/en/products-CYin07-1.html https://www.chelic.com/website/en/products-GRin-2.html https://www.chelic.com/website/en/products-GRin-2.html https://www.chelic.com/website/en/products-DIin-2.html https://www.chelic.com/website/en/products-VAin-6.html https://www.chelic.com/website/en/products-VAin-2.html https://www.chelic.com/website/en/products-DIin-3.html https://www.chelic.com/website/en/products-MOin-1.html https://www.chelic.com/website/en/products-CYin10-2.html https://www.chelic.com/website/en/products-CYin12-1.html https://www.chelic.com/website/en/products-CYin11-2.html https://www.chelic.com/website/tw/products-CYin07-1.html

EDM series Angular Type Electric Gripper

2D.3D Download

EDG series 2-Finger Electric Gripper

2D.3D Download

EQX series Electric Actuator

2D.3D Download

EDX series Electric Slide Table

2D.3D Download