MFM-FC-Gas Mass Flow Meter

Features of Gas Mass Flow Meter：

  • ● Safety explosion-proof.
    ● High cost performance.
    ● High accuracy, compact size.

MFM-FC-Gas Mass Flow Meter
  • Detail
  • Code of order
Item Model MFM-FC
Measuring range   (Nitrogen test results) 10, 20, 50, 100, 200, 500 (sccm); 1, 5, 10, 50, 100, 200, 500,   800 (slm)
Air requirements Clean, dry and non-corrosive gases
Measurable gases Air, N2, O2, CO2, He, H2, CH4, Ar…etc.
Flow display Accuracy 1.0% F.S < 50slm, 1.5% F.S    ≤ 100slm and ≥ 50slm, 2.0% F.S > 100slm
Repeatability (F.S.) ±0.2% or less
Resolution 0.01 sccm ≤ 100 sccm, 0.1 sccm ≤ 1 slm and >100 sccm, 1   sccm ≤ 5 slm and >1 slm, 0.01slm >5slm
Range ratio 100:01:00
Withstand pressure   (MPa) 1.6
Flow pressure loss   (Pa) 100 or less (Specific   range details)
Response time (ms) 10
Environment Operating temperature (℃) 0 ~ 50 (No icing, no frosting)
Operating humidity (RH) 10% ~ 90% or less
Operating pressure (MPa) 0 ~ 1
Storage temperature (℃) -20 ~ 85 (No icing, no   frosting)
Power Voltage (V) DC 8 ~ 24
Power consumption (W) 250 or less
Display method LCD screen (100ms refresh rate) or host computer
Communication   port Connector type 7-pin aviation connector
Analog control (mA) 4 ~ 20
Digital control RS-485
Communication output Connector type 7-pin aviation connector
Data transfer rate 9600(Default setting), 14400, 19200, 38400, 56000, 57600,   115200 (Can be modified via commands or host computer)
Communication protocol Modbus-RTU
Device position 1 (Default setting) ~ 250 (Can be modified via commands or   host computer)
Connector type No external connector (standard type) ;Quick connector: Ø6,   Ø8mm; Compression Fitting: 6mm, 8mm, 1/8", 1/4" , 1/2";   VCR1/4", VCR1/2"
Gas contact material Aluminum alloy, FKM, Silicon dioxide
Body material Base Aviation aluminum alloy (bulk orders available in 316L   stainless steel) Outer shell: Aluminum alloy
Sealing material FKM
Weight (g) 370 ( < 50 slm ) ; 650 ( 100, 200 slm ) ; 570 (500, 800   slm)
UnSelected
Selected
Correct model
P/N incomplete
MFM-FC-Gas Mass Flow Meter
- +

*Please select the required specifications in order, and the corresponding products will be generated below.

1
2

● The product has internal G1/4 G1/2 female thread and G1 male thread. Please refer to the dimension chart. Customization is not supported.

3

● Supports both digital and analog output (avoid to output in the same time to prevent interference)

4

● Supports both digital and analog output (avoid to output in the same time to prevent interference)

5
L O A D I N G