Clamp Cylinder
Pneumatic swing clamp cylinder - SCR(L)series

Bore size:Ø12~Ø63,Acting:Double acting,Strok:10~50mm。

  • A variety of types:

    You can choose the left turn (SCL) or right turn (SCR) type.
  • Automated control:

    Inductive magnets is inside, which can be used to control with sensors.
Model SCR(L) Type Air pressure type
Bore size φmm 12、16、20、25、32、40、50、63 Acting Double acting
Pressure range kgf/cm2 1~9

Clamp cylinder
Pneumatic swing clamp cylinder - HERseries

Bore size:Ø20~Ø40,Acting:Double acting,Strok:13~15mm。

  • Save space:

    Integrate two sets of rotary under pressure cylinders in a group of bodies to save space and facilitate installation.
  • Automated control:

    Inductive magnets is inside, which can be used to control with sensors.
Model HER Type Air pressure type
Bore size φmm 20、25、32、40 Acting Double acting
Pressure range kgf/cm2 2~9

Clamp cylinder
Pneumatic swing clamp cylinder - HGR(L)series

Bore size:Ø20~Ø40,Acting:Double acting,Strok:5mm。

  • Without rotary stroke:

    The clamp rotates 90º first, then presses down, without rotary stroke, the overall height is lower.
  • A variety of types:

    You can choose the left turn (HGL) or right turn (HGR) type.
  • Automated control:

    Inductive magnets is inside, which can be used to control with sensors.
Model HGR(L) Type Air pressure type
Bore size φmm 20、25、32、40 Acting Double acting
Pressure range kgf/cm2 1.5~8

Clamp cylinder
Pneumatic swing clamp cylinder - HSR(L)series

Bore size:Ø25~Ø63,Acting:Double acting,Strok:13、15、17mm。

  • Simple structure:

    The structure is simplified, height is reduced, and the operation height is smaller than that of SCR (L) series.
  • A variety of types:

    You can choose the left turn (HSL) or right turn (HSR) type.
Model HSR(L) Type Air pressure type
Bore size φmm 25、32、40、50、63 Acting Double acting
Pressure range kgf/cm2 1~7

Clamp cylinder
Pneumatic swing clamp cylinder - HBR(L)series

Bore size:Ø20~Ø80,Acting:Double acting,Strok:13、15、17、20mm。

  • Simple structure:

    The structure is simplified, height is reduced, and the operation height is smaller than that of SCR (L) series.
  • A variety of types:

    You can choose the left turn (HBL) or right turn (HBR) type.
  • Automated control:

    Inductive magnets is inside, which can be used to control with sensors.
Model HBR(L) Type Air pressure type
Bore size φmm 20、25、32、40、50、63、80 Acting Double acting
Pressure range kgf/cm2 1~7

Clamp cylinder
Pneumatic swing clamp cylinder - HFR(L)series

Bore size:Ø20~Ø63,Acting:Double acting,Strok:13、15、17mm。

  • Save work space:

    Move the mounting position above the cylinder to reduce the compression height.
  • A variety of types:

    You can choose the left turn (HFL) or right turn (HFR) type.
  • Automated control:

    Inductive magnets is inside, which can be used to control with sensors.
Model HFR(L) Type Air pressure type
Bore size φmm 20、25、32、40、50、63 Acting Double acting
Pressure range kgf/cm2 1~7

Clamp cylinder
Pneumatic swing clamp cylinder - HUR(L)series

Bore size:Ø10~Ø32,Acting:Double acting,Strok:25~250mm。

  • DISK環、U-Packing 環 (HNBR) 設計:

    耐磨性佳、密封性優、溫度範圍廣 - 40~+150℃ (壽命可達5000萬次)。
  • 橋式整流器設計:

    將AC電壓轉換為DC,故AC通電時無雜音產生。
  • 低電力消耗:

    功率0.95W(DC電壓),與他牌3W相較可「省電約70%」。
Model HGR(L) Type Air pressure type
Bore size φmm 20、25、32、40 Acting Double acting
Pressure range kgf/cm2 1.5~8